• Company
  • Quality · Safety · Environment


Quality Policy & Objectives

Quality Policy

Techcross Water & Energy Inc. provides the best environmental solution for the pleasant environment of human society and the realization of healthy natural ecology. To this end, we prevent quality incident and nonconformities based on the operation of a Quality Management System(QMS) that meets customer needs and global standards, and create optimal quality performances that meet customer expectations. We also contribute to the creation of customer value by realizing Quality Excellence through

Quality Objectives
QMS Establishment & Standardization
  • Quality system level of global top tier
  • Project execution standard management
  • Minimizing gray zone through clear R&R
  • Operation of quality assurance system by customer perspective
Core Quality Indicator Management
  • Achieving "Zero" quality incident
  • Nonconformity recurrence rate control
  • Periodic indicator monitoring and data analysis, risk factor detection and countermeasures
Proactive Action to Prevent Quality Incident
  • Quality training for managers & labors
  • Operation of nonconformity prevention system & on-site quality audit program
  • Eliminate potential nonconforming causes through change point management
Continuous Improvement & Innovation
  • Operation of lessons & learned system
  • Periodic Review of QMS Effectiveness
  • Propose improvement direction based on quantitative data
  • Continuous improving work processes

Safety & Health Policy and Objectives

Safety & Health Policy

Techcross Water & Energy Inc. recognizes safety and health as a top priority in corporate management activities. The following safety and health policies will be implemented to create a safe and pleasant working environment.

  1. 01

    All employees recognize that safety and health is the most important value, and take the initiative to practice it.

  2. 02

    By preemptively implementing safety and health plans and eliminating potential risk factors, we create a safe and pleasant working environment.

  3. 03

    We actively support the provision of human resource, facility, and budget in terms of safety and health.

  4. 04

    We try our best to fulfill corporate social responsibility by strictly adhering to safety and health standards and regulations.

  5. 05

    We periodically check and improve on the appropriateness and effectiveness of our safety and health policies, objectives, and management systems.

These policies will be carried out under the responsibility of the Chief Quality & Safety Officer, and all employees must acknowledge the importance of safety and health and actively practice these policies.

Safety & Health Objectives
  1. 01 Serious Accident 'Zero'
  2. 02 Occupational Accident Rate of '0.1 or less'
  3. 03 Safety and Health Management Level of '85 Score or Higher'
Safety first
Reinforce safety and health competency
  • Reinforce safety and health duties implementation and establishment at workplace
  • Five Safety Rules compliance and application
Reinforce safety and health management
  • Closing management of potential and critical hazards in each workplace
  • Preliminary measures concerning the safety and health matters from management of change
Reinforce safety and health awareness
  • Improving the level of safety and health in the workplace through support and audit
  • Strengthen standardization through establishment and revision of safety and health documents

Environment Policy and Objectives

Environment Policy

All employees of Techcross Water & Energy Inc. implement eco-friendly solutions at all stages of business activities in order to practice sustainable environment management, and establish and implement the following environment policy to preserve pleasant and abundant environment.

  1. 01

    We maintain environment management system in compliance with ISO 14001 standards and abide by environmental laws and regulations to create mature environment culture acceptable by all interested parties.

  2. 02

    We minimize production of waste and pollutants by pursuing resource saving and recycling and efficient use of energy.

  3. 03

    We constantly pursue environment pollution prevention and improvement activities on premises.

  4. 04

    We perform environment education and trainings on all employees to raise their awareness, and actively implement environment preservation activities.

  5. 05

    We safe environment-related costs and endeavor to create profits through
    eco-friendly design and technology development.

We actively follow the above policy, disclose every related activities to our internal and external interested persons and constantly purse improvement.

Environment Objectives
  1. 01 Achieve “zero” environment accident through compliance with legal standards
  2. 02 Minimize pollutant emission through efficient operations
Develop efficient operation technologies · Constant environment improvement activities
Reinforce environment awareness and competency
  • Employee training/education on environment awareness
  • Clarify employee’s roles and responsibilities
  • Secure professional competency of employees
Establish organized environment system
  • Establish top-level environment system in Korea
  • Prevent environment pollution through constant improvement efforts
  • Regular environment monitoring, measurement and analysis
Techcross Water & Energy Inc. Chief Quality & Safety Officer(CSO) Ha Sang-woo
Introduction of International Quality Management System and Certification
Techcross Water & Energy Inc. established a quality management system and obtained the ISO 9001, an international standard. All of our projects include quality control activities to meet customers’ quality standards. Also, we endeavor to prevent any recurrence of nonconformities and continue to make improvements, spreading quality management culture.

ISO 9001 Quality Management System
ISO 9001 is an international standard for quality management system established and implemented by the International Organization for Standardization (ISO)∙, which is required for businesses to ensure reliable quality to customers. Techcross Water & Energy Inc. obtained the ISO 9001 certification from BSI on March 24, 2014.

British Standards Institution (BSI)

Introduction of International Safety & Health Management System and Certification
Techcross Water & Energy Inc. established a safety & health management system and obtained the ISO 45001, an international standard. We make efforts to improve safety and health management activities at all projects sites and our headquarters. Also, our safety & health management culture is well rooted through various evaluations and constant support to ensure safety and health of our employees and employee of our partners.

ISO 45001 Safety and Health Management System
ISO 45001 is an international standard for safety & health management system established and implemented by the International Organization for Standardization (ISO), which set forth various requirements to identify and constantly control risk factors as self-regulatory efforts to prevent industrial accidents during projects. Techcross Water & Energy Inc. obtained ISO 45001 certification from BSI on November 26th, 2014.

British Standards Institution (BSI)

Introduction of Environment Management System and Certification
Techcross Water & Energy Inc. established an environment management system and obtained the ISO 14001, an international standard. We make environment management efforts at all stages, including design, procurement and construction, and establish environment management culture to minimize any impact on environment and improve environmental efficiency.

ISO 14001 Environment Management System
ISO 14001 is an international standard for environment management system established and implemented by the International Organization for Standardization (ISO), which set forth various requirements to reduce environmental impact during projects using established methods. Techcross Water & Energy Inc. obtained ISO 45001 certification from BSI on December 10th, 2015.

British Standards Institution (BSI)

Quality · Health & Safety · Environment Management System

We have established and operated our management system based on the ISO standards for quality, health & safety and environment of the company. The system is under continuous improvement and development through the PDCA cycle.

ISO Management System
Establishing process operation plans, reflecting customer requests and management policies/goals
Operating the process and managing non-conformities and emergency situations
Continuous efforts for improvement of management system and customer satisfaction
Monitoring, measurement, analysis and assessment of process achievements

Project quality management

We are operating a systematic quality management system to ensure the highest quality that meets the project requirements and guarantee design plant performance for our customers.

Quality Management System
  • QP
    (Quality Plan)
    • Establish quality management plans to meet project requirements
    • Secure quality resources (workforce, equipment, infrastructure)
  • QA
    (Quality Assurance)
    • Establish and operate quality management processes
    • Quality training, project audit program
  • QC
    (Quality Control)
    • Ensure material and construction quality through inspections·tests
    • Prevent, find out and rectify non-conformities
  • QI
    (Quality Improvement)
    • Improve processes through quality monitoring analysis
    • Accumulate lessons learned cases and perform quality improvement activities

Project Health & Safety Management

We have established key processes for prevention of serious and recordable accident as the health & safety management system. We have established and operated strategies to strengthen health & safety leadership and execution under the CSO in each business sector.

  • PSA
    Proactive Safety Action
    Breaking the accident chain, finding out near miss cases and taking appropriate actions
  • Safety Audit
    conducted by CSO
    Safety activities to enhance employees‘ safety awareness and to improve safey culture promotion
  • Led by Managing Supervisors
    Safety training for general workers
    Work-specific safety training under the oversight of managing supervisors
  • Worker-participatory
    Risk Assessment
    Finding out risk factors and performing activities to improve unsafe behavior, situation and action with all workers
  • Safety Rules
    5 Safety Rules compliance
    Major safety rules for main hazardous tasks to prevent serious accidents and make safe working environment
  • IT
    Risk control management in real-time
    Videoconferencing between the smart safety system control center and work sites
5 Safety Rules compliance
5 Safety Rules
Confined space work
Harmful gas density detection before entry and regularly and watcher person arrangement
Hot work
Keeping inflammable and combustible materials at a safe distance of above 11 meters from the workplace
Chemical material handling
Wearing 100% appropriate PPE and managing supervisor assignment
Working at height
Wearing full body harness and preparing scaffolding installation above 2 meters
Heavy equipment operation
Barrier installation, signalers arrangement and simultaneous work up and down forbiddance